Densification of PZN-10PT ceramics from powders obtained by the combustion reaction synthesis

Authors

DOI:

https://doi.org/10.17230/ingciencia.10.20.1

Keywords:

PZNPT, perovskite phase, combustion synthesis, dilatometry.

Abstract

((1-x)Pb(Zn1=3Nb2=3)O3-xPbTiO3-PZN-xPT) single crystals with perovskite structure near to the morphotropic phase boundary (MPB), x_0; 09, exhibit unusual large dielectric and piezoelectric constants. Preparation of PZN-PT ceramics with composition near to the MPB using conventional methods leads to ceramics with pyrochlore structure. In this paper, ((1 - x)Pb(Zn1=3Nb2=3)O3-xPbTiO3-PZN-xPT) powders with x= 0; 10 were synthetized by the combustion reaction method. CO(NH2)2, C2H5NO2, CO(NH2)2=C2H5NO2 y C4H16N6O2 were used as fuels. Results show that a máximum of 70% of perovskite phase was obtained using CO(NH2)2= C2H5NO2 (in relation 50=50). The afore mentioned phase is preserved when sintering the sample at 1000_C, during 4h on nitrogen atmosphere.

MSC: 74E15, 74E40, 74N15

PACS: 80.81


Downloads

Download data is not yet available.

Author Biographies

  • C F V. Raigoza, Universidad del Cauca

    Doctorado en Ciencia e Ingeniería de Materiales. Profesora Titular Departamento de Física Universidad del Cauca

  • J A Eiras, Universidade Federal de São Carlos
    Doctor en Metalurgia Física
  • Ruth H Kiminami, Universidade Federal de São Carlos

    Doctora en Ingenieria de Materiales

  • Ducinei Garcia, Universidade Federal de São Carlos
    Doctora en Física

References

D. E. Cox, B. Noheda, and G. Shirane, “Universal phase diagram for high-piezoelectric perovskite systems,” Applied Physics Letter, vol. 79, no. 3,

pp. 400–402, 2001. [Online]. Available: http://dx.doi.org/10.1063/1.1384475

K. Kuwata, M. Uchino, and S. Nomura, “Dielectric and Piezoelectric Properties of 0.91Pb(Zn_3Nb_2O_3)–0.09PbTiO_3 Single Crystals,” Japanese

Journal of Applied Physics, vol. 21, no. 9, pp. 1298–1302, 1982. [Online]. Available: http://dx.doi.org/10.1143/JJAP.21.1298

H. M. Jang, S. H. Oh, and J. H. Moon, “Thermodynamic Stability and Mechanisms of Formation and Decomposition of Perovskite Pb(Zn_{1

/3}Nb_{2/3})0_3 Prepared by the PbO Flux Method,” Journal of American Ceramic Society, vol. 75, no. 1, pp. 82–88, 1992. [Online]. Available:

http://dx.doi.org/10.1111/j.1151-2916.1992.tb05446.x

N. Wakiya, “Thermal stability of Pb(Zn_{1/3}Nb_{2/3})O_3 (PZN) and consideration of stabilization conditions of perovskite type compounds,” Materials

Research Bulletin, vol. 30, no. 9, pp. 1121–1131, 1995. [Online]. Available: http://www.sciencedirect.com/science/article/pii/0025540895001026

R. Kiminami, “Combustion and synthesis of nanopowder ceramic powders,” Kona Powder and Particle, vol. 19, pp. 156–165, 2001. [Online]. Available:

https://www.jstage.jst.go.jp/article/kona/19/0/19_2001019/_pdf

M. A. Sekar, A. Halliyal, and K. C. Patil, “Synthesis, characterization and properties of lead-based relaxor ferroelectrics,” Journal of Materials Research,

vol. 5, pp. 1210–1218, 1996.

M. A. Sekar and A. Halliyal, “Low-temperature synthesis, characterization, and properties of lead-based ferroelectric niobates,” Journal of American Ceramics

Society, vol. 81, no. 2, pp. 380–388, 1998.

O. Burgos-Montes and E. al, “Influence of combustion aids on suspension combustion synthesis of mullite powders,” Journal of European Ceramic

Society, vol. 26, no. 15, pp. 3365–3372, 2006. [Online]. Available: http://www.sciencedirect.com/science/article/pii/S0955221905007612

S. R. Jain, K. C. Adiga, and V. R. Verneker, “A new approach to thermochemical calculations of condensed fuel-oxidizer mixtures,” Combustion and Flame, vol. 40, pp. 71–79, 1981. [Online]. Available: http://www.sciencedirect.com/science/article/pii/0010218081901115 196

Downloads

Published

2014-04-29

Issue

Vol. 10 No. 20 (2014)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

How to Cite

V. Raigoza, C. F., Eiras, J. A., Kiminami, R. H., & Garcia, D. (2014). Densification of PZN-10PT ceramics from powders obtained by the combustion reaction synthesis. Ingeniería Y Ciencia, 10(20), 11-21. https://doi.org/10.17230/ingciencia.10.20.1