Processing Criteria and Experimental Data Quality for a High Compression Ratio Spark Ignition Engine

Main Article Content

Edisson S Castaño Mesa
Universidad de Antioquia
http://orcid.org/0000-0001-7427-4037
Sebastian H Quintana
Universidad de Antioquia
http://orcid.org/0000-0003-3130-6531
Iván D Bedoya
Universidad de Antioquia
http://orcid.org/0000-0001-6909-9131
Andrés Amell Arrieta
Universidad de Antioquia
http://orcid.org/0000-0003-4473-4105

Keywords

analysis methodologies, high compression ratio spark ignition engines, equivalence ratio, CA05, residual mass

Abstract

This article presents the evaluation of some of these methodologies applied to a high compression ratio-spark ignition engine, which was achieved through modification of a commercial Diesel engine. The accuracy on calculation of equivalence ratio from exhaust gas analysis and the start of combustion from mass fraction burned has been tested. The effect of trapped mass on the in-cylinder energy balance was determined. The results suggest that the tested methodologies for calculation of equivalence ratio, start of combustion, and trapped are reliable tools for evaluation of quality of data and studying spark ignition engines with high compression ratios.

Downloads

Download data is not yet available.
Abstract 1385 | PDF (Español) Downloads 826 HTML (Español) Downloads 809

References

[1] J. Heywood, Internal Combustion Engine Fundamentals. McGraw-Hill Education,1988. 108, 109, 114, 115, 116

[2] W. M. William, “Spark ignition engine combustion process analysis,” Ph.D.dissertation, PhD thesis. University of Nottingham, 1990. 108

[3] S. Karagiorgis, N. Collings, K. Glover, N. Coghlan, and A. Petridis,“Residual Gas Fraction Measurement and Estimation on a HomogeneousCharge Compression Ignition Engine Utilizing the Negative Valve Overlap Strategy,” SAE International, Oct. 2006. [Online]. Available:http://www.sae.org/technical/papers/2006-01-3276 109

[4] H. J. Yun and W. Mirsky, “Schlieren-Streak Measurements of Instantaneous Exhaust Gas Velocities from a Spark-Ignition Engine,” SAE International,p. 16, Feb. 1974. [Online]. Available: http://papers.sae.org/741015/ 109, 115

[5] E. A. Ortiz-Soto, J. Vavra, and A. Babajimopoulos, “Assessment of Residual Mass Estimation Methods for Cylinder Pressure Heat Release Analysis of HCCI Engines With Negative Valve Overlap,” Journal of Engineering for Gas Turbines and Power, vol. 134, no. 8, p. 082802, Aug. 2012.[Online]. Available: http://gasturbinespower.asmedigitalcollection.asme.org/article.aspx?articleid=1430077 109

[6] G. Woschni, “A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine,” SAE International,p. 19, Feb. 1967. [Online]. Available: http://papers.sae.org/670931/ 109, 116

[7] G. F. Hohenberg, “Advanced Approaches for Heat Transfer Calculations,”Feb. 1979. [Online]. Available: http://papers.sae.org/790825/ 109

[8] E. Porpatham, A. Ramesh, and B. Nagalingam, “Investigation on the effect of concentration of methane in biogas when used as a fuel for a spark ignition engine,” Fuel, vol. 87, no. 8-9, pp. 1651–1659, 2008. 109

[9] E. Porpatham, A. Ramesh, and B. Nagalinga, “Effect of compression ratio on the performance and combustion of a biogas fuelled spark ignition engine,”Fuel, vol. 95, pp. 247–256, 2012.109

[10] I. D. Bedoya Caro, “Estudio de la influencia del sistema de mezclado y la calidad del combustible piloto en el desempeño de un motor dual,” p. 119,2007. 110

[11] M. F. J. Brunt and C. R. Pond, “Evaluation of Techniques for Absolute Cylinder Pressure Correction,” Tech. Rep., Feb. 1997. [Online]. Available:http://papers.sae.org/970036/ 112

[12] H. Zhao and N. Ladommatos, Engine Combustion Instrumentation and Diagnostics. SAE International, 2001. [Online]. Available: http://books.sae.org/r-264/ 114

[13] J. F. Sinnamon and M. C. Sellnau, “A New Technique for Residual Gas Estimation and Modeling in Engines,” SAE
International, p. 17, Apr. 2008.
[Online]. Available: http://papers.sae.org/2008-01-0093/ 120

Article Sidebar

PDF (Español) HTML (Español)
Published
Feb 22, 2016
DOI https://doi.org/10.17230/ingciencia.12.23.6

Article Details

How to Cite
Castaño Mesa, E. S., H Quintana, S., Bedoya, I. D., & Amell Arrieta, A. (2016). Processing Criteria and Experimental Data Quality for a High Compression Ratio Spark Ignition Engine. Ingeniería Y Ciencia, 12(23), 107–125. https://doi.org/10.17230/ingciencia.12.23.6
Issue
Vol. 12 No. 23 (2016)
Section
Articles
Supporting Agencies
Author Biographies

Iván D Bedoya, Universidad de Antioquia

Profesor del Departamento de Ingerniería Mecánica de la Universida de Antioquia, PhD en Ingeniería e Investigador del Grupo Ciencia y Tecnología del Gas y Uso Racional de la Energía GASURE

Andrés Amell Arrieta, Universidad de Antioquia

Profesor del Departamento de Ingerniería Mecánica de la Universida de Antioquia, MSc en Ingeniería y Coordinador del Grupo Ciencia y Tecnología del Gas y Uso Racional de la Energía GASURE

Authors who publish with this journal agree to the following terms:

  • Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  • Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).